产品描述



  • TOM 374

    上海盈沣元器件有限公司专业代理销售德国Kleinwaechter表面电阻测试仪,kleinwaechter重锤式表面电阻测试仪,kleinwaechter静电场测试仪

    如有需求，欢迎来电垂询 缑先生

    The TERA ohmmeter TOM 374 uses the voltage measuring method, whereas a a electro field meter is used  as a measuring amplifier due to its high input resistance. Therefor high resistors up to 1014Ω can be measured with a measuring voltage of 100V and an accuracy of 5% directly against earth. Besides the connecting sockets are additional ground jacks to connect earthed measuring lines to eliminate measuring inaccuracies due to parasitary effects. To comply to standards  (IEC, EN, DIN, VDE u.a.) the demanded measuring time can be adjusted by an internal timer.

    The input impedancy of the device is > 1016Ω


    Specifications:
    Dimensions:  150mm x 150mm x 88mm (L x W x H)
    Weight: Approx. 990g
    Display:
          		Double spaced alphanumeric two digit display, display 100mm x 24mm
    Serial pc interface: 

    Serial interface for device controlling and data output (9-pol. SUB-D connector)

    Power supply:
     
     
     

    Internal with storage battery 7,2V / 1300mAh (permanently supervised), operation time approx. 4h permanent operation with fully charged battery
    external with mains adapter 12V DC / 500mA

    Charge time: Max. 14h
    Charging rate: Approx. 100 mA in battery operation
    Self power-off:
    		 Approx. 5min after end of measuring if no button pressed

    Scope of delivery
  • Transport case with conductive foam interior
  • Mains adapter 230V~ / 50Hz - 12V DC / 500mA
  • 2 pc. teflon-coated measuring line 1m with 4mm banana plugs
  • Grounding cable with alligator clip
  • Serial pc cable
  • PC software on 3,5“ floppy
  • Manual
  • Declaration of calibration

    TOM 374 im Koffer mit Elektroden


  • TOM 600


    TOM 600The TERA - Ohm Meter TOM 600 works with the current-voltage measuring process. 
    To the adaptation to international norms (IEC) EN, DIN, VDE i.e.) you can select the measuring 
    time with an internal timer. The measuring voltage can be selected automatically or manually.
    An internal EEPROM memory can save up to 99 measured values. With an Excel software you can read out and control the TOM 600.


    Measuring range

    10 kΩ... 2 TΩ 
    ( 104....1012Ω)
     tolerance: ± 1 x 10n


    Measuring voltages

    < 200kΩ  =    10V
    > 200kΩ  =  100V

    Specifications

    Dimensions:  200mm x 100mm x 40mm (L x W x H)
    Weight: approx. 380g (without batteries)
    Display:
     

    Alphanumeric display (2 rows x 16 digits), indicator panel 60mm x 15mm

    PC-Interface:
     
     

    USB - Interface with small USB Socket

     

    Power supply:
     
     

    4 pc. AA cells, 2100mAh. (permanent supervised) operating time approx. 6h with fully charged cells, external with mains adapter 9V DC / 300mA

    Charging time: max. 14h
    Power comsumption: max. 100mA
    Auto Switch Off: approx. 5min after the measurement, when no button pressed


    Scope of delivery TOM-600

     
  • Mains adapter  230V~ / 50Hz  -  9V DC / 300mA
  • 4 pc. AA Mignon NiMH cells
  • 2 pc. teflon isolated measurement strips 1m each, with 4mm banana plugs
  • serial pc USB
  • software on CD
  • manual

     
    Additional scope of delivery TOM-600 ME
  • 2 pc. measurement electrodes 2,5 kg according to EOS/ESD-S4.1 and S7.1
  • 1 pc. teflon isolated measurement strip 5m instead of 1 pc. teflon isolated measurement strip 1m with 4mm banana plugs

    • EFM 022 (336.022.0)


    Elektrofeldmeter EFM 022The electro fieldmeter EFM 022 is very user friendly due to its compact design and one touch operating. The dissipative housing of the unit is EPA - compatible.

    Menu driven selection of measurement distance
    Voltage potentials can be directly measured for preselected measurement distances, thus would avoid recalculation. 5 measurement distances are available, which makes it even possible for your most convenient handling in problematic areas.

    Hold function
    The hold function keeps the actual reading in memory, e.g. after obtaining measurements in spots where the on-line reading of display is not possible.

    No zero drift
    Therefore a zero adjustment is not needed before each measurement.

    Measurement ranges: 
    distance 1cm: 0 to 8kV
    distance 2cm: 0 to 16kV
    distance 5cm: 0 to 40kV
    distance 10cm:  0 to 80kV
    distance 20cm:  0 to 160kV 

    Specifications:     
    Dimensions: 122mm x 70mm x 26mm ( L x W x H )
    Weight: approx. 130 g (without battery)
    Power supply: 9V Alkali battery  IEC 6F22

    Display:

     

     

    		2-line alphanumeric LC-display with 12 digits each
    The measurement distance in cm will be displayed in the first line, the voltage potential will be indicated in volts in the second line.


    Scope of delivery:
  • soft bag
  • 9V Alkaline battery
  • grounding cable 1,5m 
  • 2 distance supports (2cm) 
  • manual
  • certificate of calibration


    • EFM 113B (336.113.0)


    EFM 113BThe EFM 113B is a small and handy electro field meter with a high sensitivity designed for the measurement of dc fields and static charges according to the fieldmill influence principle. Analog current output  (±1mA).

     

     


     
    Specifications:

    Dimensions: 120mm x 40mm (l x d)
    Measuring range: 5kV/m, 20kV/m, 50kV/m und 200kV/m
    Metering precision:  5% in a homogenous field
    Calibration:

    		 In the homogenous field of a plate capacitor
    plate size 200mm x 200mm, plate distance 25mm
    modulator system mounted centered in the plate
    Power supply: 9-15V DC / 80mA
    Interface: Analog current output ?1mA
    Mounting:
          		Alumonium clamping yoke with photo thread (optional) 
    Operating time: In one shift operation min. 2 years

    Scope of delivery
  • Connection cable
  • Manual
  • Declaration of calibration

    • EFM 120 (336.120.0)


    EFM 120

    Small and handy electro field meter with 21 figure LED row with smooth transition. This provides a scale-reading precision of approx. 5%.

    Special features:
  • Solid aluminium housing
  • LED bargraph, thereby high scale-reading precision
  • Zero point with green LED
  • Built-in NiMH storage battery with permanent charging supervision
  • Analog writer output ± 1V for data recording
  • Easy appliance and maintenance

    Walking Test according to DIN 61340-4-5

    Together with the optional pico software, the hand-held electrode and the gage head MK11 S2 a walking test according to DIN 61340-4-5 can be performed.

    Specifications:


    Measuring range:  ± 20 kV/m, ± 200 kV/m, ± 2 MV/m 
    Dimensions: 100mm x 80mm x 38mm (l x w x h) 
    Weight: Approx. 370g
    Writer output:
    		 ± 1V / Ri >1kΩ 


    Scope of delivery
  • Transport case with conductive foam interior
  • Built-in 7,2V NiMH - Akku
  • Mains adapter 230V~ / 50Hz
  • Grounding cable with alligator clip
  • Measuring line to connect the writer output
  • Manual 
  • Declaration of calibration

    • EFM 122 (336.122.0)


    EFM 122With the EFM 122 you can measure the potential of an object in Volt over a pre-selectable distance between the electrode and the measuring object. Charges and fields of positive and negative polarity can be located and measured. You can select the measuring distance between 1cm, 2cm, 5cm, 10cm and 20cm. The integrated micro controller converts the measured field intensity automatically to the charge of an equivalent potential in Volt. Potentials higher than 1000V are displayed in kV. The handy design with separate measuring electrode and the data latching feature enable measuring at places where you have concentrate on positioning the electrode for safety reasons.

    Please Note: This instrument includes only a serial Interface with a simple DOS Software. To use at a PC we prefer one of our other instruments with analoque Interface ±1V and our UAC 110 wit the ReadOut Software !!


    Specifications:

    Dimensions:
          		Hand-held unit: 70mm x 122mm x 26mm (L x W x H)
    Gage head: ? 36mm x 136mm
    Weight:

    		 Hand-held unit 130 g (without storage battery), gage head 190 g
    Power supply:
    		 9V NiMH storage battery with charger DC 12 V 
    Measuring ranges:



    		 distance 1 cm : 0.....10 kV max. resolution 1 V
    distance 2 cm : 0.....20 kV max. resolution 2 V
    distance 5 cm : 0.....50 kV max. resolution 10 V
    distance 10 cm : 0...100 kV max. resolution 10 V
    distance 20 cm : 0...200 kV max. resolution 20 V
    Display: Double spaced alphanumeric 12-digit LCD display
    Operating time: Approx. 2 Std. in battery mode 
    Calibration:
     
          		In homogenous field of a plate capacitor, plate size 100mm x 100mm, plate distance 20mm, modulator system mounted centered

     

    EFM 122 in transport case

    Scope of delivery

  • EFM-122 sensor with insulation cap
  • 9V NiMH storage battery, charger 12V
  • Manual
  • Declaration of calibration
  • Transport case with conductive foam interior
  • Grounding spiral cable with alligator clip
  • DOS PC software and serial connection cable

     

    • EFM 125 (336.125.0)


    EFM 125Small electro fieldmeter for the permanent control and the measuring of electrostatic DC-fields and electrostatic charges with high sensitivity, using the fieldmill influence principle.
    Serial RS485 bus system for up to 16 EFM 125. (8 Bit data protocol)

    Specifications:

    Dimensions: 120mm x 40mm (l x d)
    Measuring range: 5kV/m, 20kV/m, 50kV/m und 200kV/m
    Metering precision:  ± 5% in an homogenous field
    Calibration:

    		 In homogenous field of a plate capacitor
    plate size 200mm x 200mm, plate distance 25mm
    modulator system mounted centered in the plate
    Power supply: 9-15V DC / 80mA
    Interface: Serial RS485 Bus
    Mounting:
          		Aluminium clamping yoke with photo thread (optional) 
    Operating time: In one shift operation min. 2 years

    Scope of delivery
  • Connection line
  • Manual
  • Declaration of calibration 

    • EFM 231 (336.231.0)

    EFM 231High quality, precise, handheld electro fieldmeter. The incorporated micro-computer provides high operating comfort and ensures safe operating. 

    Features

  • Solid aluminium pistol housing
  • Built-in 7,2V NiMH storage battery
  • Very high sensitive and accuracy
  • Analog display
  • Analog output ±1V
  • Serial PC interface 


    Measuring ranges     
    ± 2 kV/m
    ±20 kV/m
    ±200 kV/m 

    Specifications:

    Dimensions: 180mm x 73mm x 178mm (L X W X H)
    Weight: Approx. 820g
    Display: Analog device -2..0..+2  Kl. 1,5
    Calibration accuracy:  ±2%
    Output signal:
          		±1V analog output (Ri> 1kΩ) and serial RS232 interface 

    Scope of delivery:


  • Transport case equipped with conductive foam interior
  • Mains adapter 230V~ / 50Hz
  • Measurement aperture x10
  • Stereo jack for the analog output
  • Grounding cable with alligator clip
  • Serial PC cable
  • PC interface siftware on 3,5" floppy
  • Manual
  • Declaration of calibration 

    • EFM 251 (336.251.0)

    EFM 231High quality, precise, handheld Electro-Fieldmeter. The incorporated micro-computer provides high operating comfort and ensures safe operating. 

    Features

  • Solid aluminium pistol housing
  • Built-in 7,2V NiMH storage battery
  • Very high sensitive and accuracy
  • Analog display
  • Analog output ±1V
  • Serial PC interface 

    Measuring ranges     
    ± 200 V/m
    ± 2 kV/m
    ± 20 kV/m 

    Specifications:
    Dimensions: 180mm x 73mm x 178mm (L X W X H)
    Weight: Approx. 820g
    Display: Analog device -2..0..+2  Kl. 1,5
    Calibration accuracy:  ±2%
    Output signal:
          		±1V analog output (Ri> 1kΩ) and serial RS232 interface 

    Scope of delivery
  • Transport case equipped with conductive foam interior
  • Mains adapter 230V~ / 50Hz
  • Measurement aperture x10
  • Stereo jack for the analog output
  • Grounding cable with alligator clip
  • Serial PC cable
  • PC interface siftware on 3,5" floppy
  • Manual
  • Declaration of calibration 
  • EFM 022 静电测试仪器
    EFM 113B 静电测试仪器
    EFM 120 静电测试仪器
    EFM 122 静电测试仪器
    EFM 125 静电测试仪器
    EFM 231 静电测试仪器
    EFM 251 静电测试仪器
    CPS 022 静电测试仪器
    CPM 374 静电测试仪器
    TOM 374 静电测试仪器
    TOM 600 静电测试仪器
    PGT 50 静电测试仪器
    PMS 300 静电测试仪器
    SST 200 静电测试仪器
    WST 50 静电测试仪器
    WST 100 静电测试仪器

http://www.enfionsh.com