产品描述


上海盈沣元器件有限公司专业销售德国ETH传感器，ETH分析仪，ETH放大器，ETH转换器，ETH扭矩传感器，ETH压力传感器

如有需求，欢迎来电垂询 缑先生

DMS-Amplifier / Converter

 

SISP
voltage current converter Voltage-current converter

  • Input voltage: ± 5V or ± 10 V 
    Current output: 0-20 mA or 4-24 mA

    The voltage-current converter SISP the voltage outputs of the torque sensors can be converted into a current output. This allows longer cable lengths to evaluation can be achieved.



    → more Info
DMSVE
microprozessorgesteuertes Auswerteger?t Amplifier unit for strain gauge full bridge

  • For strain gauge bridges starting 120 Ω
  • Input Sensitivity: 0,2 mV/V - 5 mV/V
  • Output: ± 5 V oder ± 10 V
  • Bridge supply in 4-wire technology
  • Linearity: < 0,04 %

    → more Info

Analyzers

 

GMV2
Multipurpose Torque Meter Multipurpose Torque Meter

  • Tool Testing
  • Production Supervising
  • Documentation conforming to DIN EN ISO 9001
  • Quality Assurance
  • Test Bench Evaluation
→ more Info
ValueView 291-1
ValueMaster is our torque measurement module for measuring torque, speed, angle, force and stroke Supply and Display Unit for active Torque Transducers

  • Resolution 24 bit
  • Sampling rate up to 50 measurements /s
  • Permanent Min / Max display
  • tare function
  • Sensor supply
  • +/- full scale input
→ more Info
ValueMasterBase
ValueMaster is our torque measurement module for measuring torque, speed, angle, force and stroke Torque Measuring Module with network connection

  • measurement of Torque, Speed, Angle, Force and Stroke
  • Connection of 2 sensors
  • Control I/O Interface with signal output e.g. for SPC
  • Analysis of values on a PC using included software
  • Network connection with Ethernet
→ more Info
GMV2-K
Evaluation device mobile for outdoor use

 Microprocessor controlled evaluation

  • ideal for mobile use in the outdoor area
  • Integrated power unit
  • Waterproof IP65 (with lid closed)
→ more Info
Switchbox
Switchbox - switcher for the most common applications in screws Switchbox for Torque Transducer 

  • measurement of torque and angle with three torque sensors
  • Operation with control switch and external setting with a PLC
  • Each sensor can be assigned to one of nineteen parameter sets
  • Avoidance of measurement with warm-up errors because of permanent sensor power supply

Force Sensors

  measurement
Range (Nm) 		Model Description
Very inexpensive train-pressure fuel sensor of high strength Aluminiun for static and dynamic measurements 0 ... 20 N
to 
0 ... 5 kN
Forcesensor
8523
8531


? Compact, robust 
? Easy to use 
? Static and dynamic measurements 
? High-strength aluminum
? very reasonably priced

Ring force sensor SM 70 for active torque sensors for test of resilience in the range from 10 kN to 1000 kN 20 kN (M6)
to 
1200 kN (M48)
 Ring-
Forcesensor 
SM 70
for active torque sensors
 		? Ring force sensor for testing of clamping forces 
? 6-42 mm hole-diameter 
? Measuring ranges from 20 kN - 1000 kN 
? All Stainless Steel 
? Degree of protection IP 66 
? Low measuring range


http://www.enfionsh.com