产品描述



上海盈沣元器件有限公司专业代理销售英国ANTON气体分析仪，ANTON烟气分析仪，ANTON气体探测器，ANTON漏气探测器

如有需求，欢迎来电垂询 缑先生


Sprint eVo 1 gas analyser 
Low cost basic domestic flue gas analyser suitable for all appliances burning natural gas, LPG, light & heavy oil, coal, wood, coke, biomass & bagasse. The Anton Sprint eVo 1 can measure flow & return ...


Sprint eVo 2 gas analyser 
In addition to all the features of the eVo 1, the Anton Sprint eVo 2 flue gas analyser has differential, timed pressure measurement for let by/tightness testing, optional plug in gooseneck gas leak detector ...


Sprint eVo 3 gas analyser 
Anton Sprint eVo 3 flue gas analyser with Bluetooth wireless communications. All of the features of the eVo 2 but now when used with the free Sprint Mobile Android App you have ...


Vent Check IAQ 8494 monitor 
The Vent Check handheld gas analyser measures ambient carbon dioxide (CO2) levels. It helps prove flueless gas appliances like space heaters, water heaters and kitchen equipment operate safely. If faulty or inadequately ventilated, these appliances ...


Vent Check Pro monitor 
NEW The Vent Check Pro handheld gas analyser measures ambient carbon dioxide (CO2) and crabon monoxide (CO) levels. It helps prove flueless gas appliances like space heaters, water heaters and kitchen equipment operate safely. If ...


AGM 50 Gas Leak Detector 
The Anton AGM 50 Flammable Gas Leak Detector is ideal for heating and ventilation engineers when pinpointing flammable gases in both residential and commercial applications. It has a long flexible goose neck and small sensor ...


Anton APM 130 Differential Manometer 
Entry level, low cost manometer, measures pressure from -40 to +130 mbar, may be used for domestic tightness testing. ...


Anton APM 140 Differential Manometer 
Pressure range: -40 to +130 mbar, timed test facility and a wide range of selectable units of measure the APM 140 is ideal for domestic tightness testing. ...


Anton APM 150 Differential Manometer 
High pressure range: 0 to 1999 mbar, timed test facility and a wide range of selectable units of measure the APM 150 is perfect for commercial strength testing. ...


Anton Carbon Monoxide Tripod Kit 
The Anton ACMT carbon monoxide tripod kit provides a professional solution holding the sample probe at the correct position to carry out room safety tests. ...


Sprint CO sampling probe set 
The Anton Sprint appliance sampling probe set enables the investigation of fumes/products of combustion from appliances such as cookers, cooker, grills, flueless appliances, etc as described in BS7967. Each of the two probes can be ...


Anton Sprint eVo carry bag - CAS29023
Large, padded and compartmentalised carry case for Anton flue gas analysers. This large, laptop style carry bag with shoulder strap is big enough to house the analyser and all accessories including the CPA1 probe ...


Sprint FIL29001 filter housing 
Filter housing (water trap) for the Anton Sprint combustion probe. ...


Sprint PRB29000 combustion flue probe 
Anton Sprint combustion probe for Anton flue gas analysers. 250mm long x 6mm diameter shaft, integral thermocouple, moulded handle and depth stop. Complete with water trap and filter. Compatible with the following: Anton Sprint V1 ...


Anton Sprint FreeVo flue probe - PRB29010 
Anton Sprint PRB29010 FreeVo combustion probe for Anton flue gas analysers. 250mm long x 6mm diameter shaft, integral thermocouple, moulded handle and depth stop. Complete with water trap and filter and unique mositure ...


Anton Sprint car charger lead 
The optional in-vehicle battery charger may be used to top up the Anton Sprint flue gas analyser's batteries from any 12 volt vehicle battery.


Anton CHG29001 Sprint-V mains adaptor/charger 
A 240 volt mains adaptor/battery charger for use with the Telegan/Anton Sprint V1, V2, V3, V4 & V5 flue gas analysers. ...


Anton PRB29003 Sprint leak detector 
The combustible gas leak detector is a simple to use, plug-in accessory for use with the Sprint V2, V3, V4 & V5 flue gas analysers. The detector enables small combustible gas leaks to be pin-pointed ...


Anton Sprinter infra-red linked printer 
The infra-red linked thermal printer allows instant, on-site printing of test results from any of the Anton range of combustion flue gas analysers.


Anton AOCK oil commissioning kit 
A kit to enable the oil engineer to correctly set up and commission the burner and oil pressure ...


APRV gas pressure relief kit 
The Anton APRV pressure relief valve kit is designed to simplify let by and tightness testing by enabling the engineer to get the desired gas pressure on their U gauge / pressure meter without having ...


Combined flow and pressure kit 
The combined flow and pressure kit is an essential tool for the boiler installation and servicing engineer. The kit enables combination boilers and water heaters to be correctly set and can also be used to ...


Flowmate II flow cup gauge 
The Anton Flowmate II flow cup weir gauge is a simple solution for checking water flow rates. ...


Flowmate flow cup with thermometer 
Check water flow rates and outlet temperatures of domestic hot water system. ...


Anton PAP26001 thermal paper rolls for the Anton Sprinter thermal printer 
The Anton Sprinter printer is used with the following Anton flue gas analysers: Anton Sprint V1, Anton Sprint V2, Anton Sprint V3, Anton Sprint V4 and Anton Sprint V5


Triple flow and pressure kit 
The Triple flow and pressure kit is an essential tool for the boiler installation and servicing engineer. The kit enables combination boilers and water heaters to be correctly set, to check whether de-scaling is required ...


Anton ADST liquid immersion thermometer 
The ADST is a dishwasher safe, low cost liquid immersion thermometer ideal for checking the temperature of domestic hot water. ...


Liquid immersion thermocouple temperature probe 
Temperature range: Ambient to +250oC, 100mm x 3mm diameter shaft ...


Air and gas temperature probe 
Temperature range: Ambient to +500oC, 100mm x 4.8mm diameter shaft with a shrouded open wire sensor ...


Velcro pipe wrap temperature probe 
Temperature range: Ambient to +100oC, Fits pipes up to 80mm diameter ...


Pipe clamp temperature probe (Anton) 
Temperature range: Ambient to +100oC, Clamps on to pipes up to 30mm diameter ...


Surface contact thermocouple temperature probe 
Temperature range: Ambient to +600oC, 100mm x 4.8mm diameter shaft ...


Open wire air temperature probe 
Temperature range: Ambient to +250oC, 1000mm lead length ...


Anton FIL99008 Sprint filter element 
Essential to reduce the possibility of dirt or other foreign matter entering the Sprint flue gas analyser and causing premature failure of sensitive and expensive components such as the pump and gas sensors.


Filter elements FIL20019 & FIL20021 - Telegan Tempest 50 and 100 
Replacement particle and coalescing filter elements for use with the Telgan Tempest 50 and 100 flue gas anayser


ERC05 impact printer ink ribbon 
A black ink ribbon cartridge for impact printers using 44mm wide paper rolls. Compatible with the Telegan Tempest 50 & 100


http://www.enfionsh.com 公司后提示信息