产品描述


上海盈沣元器件有限公司专业代理销售 英国AESSEAL密封,AESSEAL机械密封,AESSEAL轴承保护器,AESSEAL保护器

如有需求,欢迎来电垂询 缑先生

CCS

Conventional Compressor Seal

The CCS? is a tandem cartridge seal where the inboard seal is designed to seal up to 82 bar (1200 psi), and an outboard seal that acts as a low pressure tandem seal.

HHCS - Hydrostatic Hydrodynamic Compressor Seal

HHCS

Hydrostatic Hydrodynamic Compressor Seal

AESSEAL? has unique patented hydrostatic and hydrodynamic Dry Gas Compressor seal technology, offering robust protection for the sealing surfaces during start-up, shutdown, slow roll and upset conditions.

Compressor Dry Gas Seal Systems

Dry Gas Seal Support Systems

High quality compressor dry gas seal support systems engineered to customer requirements for all seal configurations and applications

Mechanical Seal for Steam Turbines

STS

Mechanical Seal for Steam Turbines

The STS mechanical seal has been developed in conjunction with a major oil refinery to replace existing carbon ring seals normally fitted to steam turbines.

Universal Dry Gas Seal

UDGS

Universal Dry Gas Seal

Non-contacting, gas lift dual cartridge seal primarily designed for pumps (ANSI/DIN) providing practically zero process emissions in service.


CS - CSC

External Seal with Non-Metallic Parts

An external seal with non-metallic components in contact with the media being sealed.

NCE - Component Seal

NCE

Non-Chemical External Seal

An external seal with metallic components in contact with the media being sealed.

SAI - Component Seal

SAI

Internal Balanced Component Seal

The SSAI? is a short internal balanced mechanical seal for use with the AESSEAL? SO5 seat.


Magtecta

Magnetically energized bearing protector

The MagTecta? range includes two sets of seal faces. These products, in the opinion of AESSEAL?, are the world’s first modular dual face bearing protectors, offering double the protection of a conventional single seal face design.

Magtecta-OM- Bearing Protection – Oil Mist

Magtecta-OM

Bearing Protection – Oil Mist

The MagTecta-OM? is a face seal that prevents oil mist pollution and has been applied to thousands of pieces of equipment in the hydrocarbon processing industry.


LabTecta66 KSB

Bearing Protection – KSB CPK Pumps

Advanced non-contacting labyrinth seal with integral shut-off valve and accessories for KSB CPK pumps.

LabTecta66 OAP- Bearing Protection – Outboard Airpurge

LabTecta66 OAP

Bearing Protection – Outboard Airpurge

The LabTecta-OAP? is specifically designed for use in extreme environments and applications where contamination may completely cover the seal /equipment.

LabTecta66 PB- Bearing Protection – Plumber/Pillow Block

LabTecta66 PB

Bearing Protection – Plumber/Pillow Block

The LabTecta-PB? utilizes a unique two-piece stator design that provides a self-aligning joint that allows the seal to align both to the bearing block and to the shaft.

LabTecta66 RDS- Bearing Protection – Radially Divided

LabTecta66 RDS

Bearing Protection – Radially Divided

The only radially divided bearing protector available with rotor / stator static sealing technology as standard. The LabTecta-RDS? is available in several configurations including flange mounted, axial movement and internal air-purge, giving even

LabTecta66 SS- Bearing Protection – Stainless Steel Metalurgy

LabTecta66 SS

Bearing Protection – Stainless Steel Metalurgy

The LabTecta-SS? is available in full stainless steel construction, giving even greater flexibility in more chemically demanding environments.

LabTecta66 ST-STAX- Bearing Protection – Steam Turbine Applications

LabTecta66 ST-STAX

Bearing Protection – Steam Turbine Applications

Process steam turbines present a unique challenge for bearing protection. As the carbon rings containing the steam wear, high temperature / high velocity steam travels down the shaft directly at the bearing seal.

LabTecta66 WARMAN- Bearing Protection – Warman Pump

LabTecta66 WARMAN

Bearing Protection – Warman Pumps

Advanced non-contacting labyrinth seal with integral shut-off valve and accessories for Warman pumps.


LabTectaM

Bearing Protection

The LabTecta?M is specifically designed for use on electric motors.

LabTecta-T - Bearing Protection – Top Entry

LabTecta-T

Bearing Protection – Top Entry

Advanced cost effective labyrinth seal, specifically designed for top-entry applications.

LabTecta OP

LabTectaOP

Bearing Protection

A cost effective bearing protection upgrade solution, which is non repairable.

LabTectaTP

LabTectaTP

Bearing Protection

Engineered Bearing Protection for use with tilting pad bearings.

LabTecta66 - Bearing Protection

LabTecta66

Bearing Protection

Eliminate over 50% of bearing failures with the LabTecta? IP66 certified bearing protector: a true non-contacting labyrinth design with a shut-off design that really works.

LabTecta66 AX- Bearing Protection – Axial Movement

LabTecta66 AX

Bearing Protection – Axial Movement

The LabTecta-AX? design uses a unique sliding rotor that allows the seal to absorb axial movement internally.

LabTecta66 IAP- Bearing Protection – Inboard Airpurge

LabTecta66 IAP

Bearing Protection – Inboard Airpurge

The LabTecta-IAP? design is ideal for applications where it is necessary to retain product, gases or exhaust within an enclosure. Common applications are fans, screw conveyors and other powder handling equipment.


SCMS

Short Canister Mixer Seal

The SCMS Mixer seal is specifically designed for use on a broad range of mixers, agitators and reactor applications.

SCUSI - Short Cartridge Mechanical Seal

SCUSI

Short Cartridge Mechanical Seal

A short externally mounted cartridge seal, with flush ports and self-aligning faces.

Exotic Alloy Seal Range for Chemical Industry

SEA2 - SEH1

Exotic Alloy Seal Range for Chemical Industry

The SEA2? and SEH1? range of cartridge single mechanical seals is specifically designed for the chemical industry. This Exotic Alloy range, offered in standard and ANSI+ configurations, is available in solid Alloy 20 and Alloy 276 materials.

SISS & SISR - Single Stationary Mechanical Seal

SISS & SISR

Single Stationary Mechanical Seals

Modular range of stationary cartridge mechanical seals for general applications in all industry sectors.

SMSS23 - Plan 23 Single Stationary Seal

SMSS23

Plan 23 Single Stationary Seal

A single cartridge stationary seal with integral Plan 23. Coupled with a helicoil cooler, the seal provides the most efficient sealing solution for this piping arrangement.

Single Spring Catridge Seal

TPOC

Single Spring Catridge Seal

The TPOC? seal range is specifically designed for applications which benefit from the use of unbalanced seal face technology.

Ultra heavy duty double cartridge seal

UHDDS

Ultra heavy duty double cartridge seal

The UHDDS? – is a double cartridge seal particularly applicable for medium to heavy duty slurry sealing applications.


IASC

Pulp & Paper Screen Application Seal

This seal employs standard, modular, inventoried AESSEAL--? components, with a seal gland, which retains fluid when the screen is emptied. This avoids dry running of the tungsten carbide seal faces on equipment start-up.

Inflatable Shut off Seal

ISOS

Inflatable Shut off Seal

The ISOS? (inflatable shut-off seal) is fitted between the pump and and radially-divided seal, to form a separate seal when required, allowing the quick and easy removal of the mechanical seal.  

non-metallic process pump seal

LSEAL

L-Series Seal

The LSEAL? is designed to suit the Flowserve Polychem 'L' Series, Group I and Group II non-metallic process pumps.

Modular Mixer Seal Range

MIXMASTER Range

Modular Mixer Seal Range

Mixer, agitator and reactor applications vary from simple blending to solid dissolution to the more exacting standards of suspension, gas dispersion or containing/promoting chemical reactions.

Progressive Cavity Pump Seal

PCPS

Progressive Cavity Pump Seals

The AESSEAL Progressing Cavity Pump mechanical seal (PCPS?) has been developed to incorporate proven modular designs from our highly-acclaimed range of single and double mechanical seals.

RDS - Split Seal

RDS

Split Seal

The RDS? eliminates the need to remove or strip equipment for seal replacement. The unique design makes it the quickest to install two part seal currently available in the market place.

RDSF Spit Mechanical Seal

RDSF

A split seal solution ideal for those difficult to reach applications

The RDSF has been developed after extensive  research and customer feedback to increase the ease that the seal can be fitted correctly – first  time.


DSWIB (MIXMASTER-II)

Double Mixer Seal

The DSWIB? (Mixmaster II) is a double mixer seal with integral bearing and concentric face design to reduce the seal's overall length. The seal is offered with the following features:

Features:

External Mixer Seal

ESM & NCM

External Mixer Seal

The AESSEAL ESM (external seal for mixers) is a unit external seal designed for ease of installation as the seal faces are clipped together and dispatched assembled in a leak-free state.

Flue Gas Desulphurization Seal

FGDSS

Flue Gas Desulphurization Seal

The FGDSS? & the FGDSS-N? (Flue Gas Desulphurization Single Slurry) single mechanical seal is designed to seal Flue Gas Desuphutization (FGD) and general slurry applications.

Richter PCK & SCK Seal

FI-DSNM-R

Richter PCK & SCK Seal

The FI-DSNM-R? is designed to suit Richter (ITT-Goulds) PCK and SCK process pumps. This unique cartridge design eliminates the OEM ceramic sleeve.

Flow Induced Dual Cartridge Seal

FIDC

Bi-Metal FIDC? - Flow Induced Dual Cartridge

The FIDC seal is the next generation of high performance sealing solutions offering increased barrier fluid flow for improved reliability.

Heavy Duty Slurry Seal

HDSS & HDDSS

Heavy Duty Slurry Seals

The HDSS and HDDSS heavy duty slurry seals are designed for the arduous environment of the mining industry. The robust seals are built to withstand levels of pump vibration with large internal clearances accommodating levels of movement.

Pulp & Paper Double Screen Seal

IADC

Pulp & Paper Double Screen Seal

The IADC? Screen seal design is a double seal available in a wide range of seal face and elastomer applications to suit individual process requirements. This seal is used on screens and knotters.


CMAX

Single Cartridge Seal – Axial Movement

The CMAX? is a single cartridge seal that allows for axial movement.

Convertor II - Cartridge Seal Designed to Replace Packing

Convertor II

Cartridge Seal Designed to Replace Packing

Cartridge seal designed to replace two-part component seals and conventional packing arrangements.

CSS CSSN - Single Cartridge Seal

CSS - CSSN

Single Cartridge Seal

The AESSEAL CSS?/CSSN? range of cartridge mechanical seals has been designed as high-performance sealing solutions for general applications.

CSWIB - Cartridge Single with Integral Bearing

CSWIB (MIXMASTER-I)

Cartridge Single with Integral Bearing

The CSWIB? (Mixmaster I) is a single cartridge mechanical seal, with balanced seal faces and an integral (steady) bearing.

Cartridge Vulcanized Spring Disc Seal

CVSD and CVSD-R

Cartridge Vulcanized Spring Disc Seal

The CVSD? and CVSD-R? mechanical seals are ideal for slurry applications. The seals are designed around AESSEAL? modular technology...

DISP - Double Stationary Seal with Pumping Scroll

DISP

Double Stationary Seal with Pumping Scroll

The DISP? range double stationary mechanical seals provide highly-technical, value-engineered sealing solutions applicable for all industry sectors. The seal incorporates an integral bi-directional flow inducer for effective seal cooling.

Non-Metalic Mechanical Seal

DSNM and FI-DSNM

Non-Metalic Mechanical Seals

The DSNM? is designed to suit the Flowserve Polychem 'S' Series non-metalic process pump.


CDM

Cartridge Double for Mixers

The CDM?cartridge double mechanical seal for mixers is available in a wide range of seal face, elastomer and alloy combinations, to suit individual applications.

Canister Double Monolithic Stationary Convection

CDMSC

Canister Double Monolithic Stationary Convection

The CDMSC? is designed specifically for Mixer, Agitator and Reactor applications. Based on the modular technology of the DMSF?, this externally mounted cartridge seal incorporates many design features to help increase seal life.

CDP - Double Mechanical Seal

CDP & CDPN

Double Mechanical seal

The AESSEAL CDP?/CDPN? range of cartridge mechanical seals has been designed as high-performance sealing solutions for general applications.  

CDPH - Heavy-Duty Double Slurry Seal

CDPH Slurry Seal

Heavy-Duty Double Slurry Seal

The CDPH? double mechanical seal is designed to meet the arduous requirements of slurry applications. Large ports and increased radial clearances enable the seal to maintain a stable fluid film...

CFC - High Performance Mechanical Seal

CFC

High Performance Mechanical Seal

These robust seals are designed for use on difficult applications, including oil pipeline pumping, water injection and boiler feed duties.

Double Stationary Seal

CKD

Double Stationary Seal Range

Stationary seal face technology to accommodate angular shaft to housing misalignment. Bi-directional flow induction (patent pending) for effective barrier heat removal

CLIP - Process Protecting Seal

CLIP

Process Protecting Seal

The cartridge lip seal is specifically designed for dry running applications where barrier fluid is not permitted to enter the process media.



BDFI & BDFC

Bellows Double Flow Induction / Convection

The BDFI?/BDFC? (Bellows Double Flow Induction/Convection) is an innovative modular hybrid design, created using the inboard design of a BQFD? and the outboard design of a DMSF?.

BDTP - Bellows Double Seal

BDTP

Bellows Double Seal

The BDTP? (Bellows Double Tandem Pumping) is a highly-innovative hybrid design, modular to the BDFI?. The seal's directed barrier fluid flow path achieves optimum heat removal at both sets of seal faces.

BQFD - Bellows Single Cartridge Seal

BQFD

Bellows Single Cartridge Seal

The BQFD? (Bellows Quench Flush Drain) range of single cartridge mechanical seals uses many of the same modular parts as a BSIV?

BSAI - Bellows Component Seals

BSAI & BSAIG

Bellows Component Seals

The BSAI? range is available in a wide range of seal face and elastomer combinations, together with self-aligning, DIN, CURC?, T, L shaped or boot mounted stationaries.

Bellows Single Full Graphite Cartridge Seal

BSFG

Bellows Single Full Graphite Cartridge Seal

The BSFG? (Bellows Single Full Graphite) cartridge seal is specifically designed to eliminate the costly and often long lead-time issues of exotic elastomer compounds.

BSIV - Single Bellow Seal

BSIV

Single Bellows

The BSIV? range of single cartridge mechanical seals has been designed as a value-for-money, high-performance sealing solution for general applications.

CDFI & CDFC - Double Mechanical Seal

CDFI & CDFC

Double Mechanical Seal

The CDFI? / CDFC? bridges the product range gap between the CDSA? and DMSF? differentiating itself in two areas.


CAPI A, B, C

Single Mechanical Seal – Oil & Gas

The AESSEAL? API Type A, B and C single-seal range offers the user an unprecedented range of API engineered sealing solutions to suit all application requirements.

CDSA - Cartridge Mounted Double Seal

CDSA

Cartridge Mounted Double Seal

This modular seal is ideal for the containment of hazardous process fluids.

CFFC - High Performance Mechanical Seal

CFFC

High Performance Mechanical Seal

The CFFC? and HPVD? are dual seals. (The CFC? and HPVS? are the single versions.)

These robust seals are designed for use on difficult applications, including oil pipeline pumping, water injection and boiler feed duties.

CSM - Single Mixer Seal

CSM

Single Mixer Seal

The CSM? cartridge single seal for mixers is available in a wide range of seal face, elastomer and alloy combinations, to suit individual applications.

CURC - CRCO - CURE Single Mechanical Seal

CURC - CRCO - CURE

Single Mechanical Seal

The AESSEAL CURC?, CRCO? and CURE? mechanical seals are part of a range of seals specifically designed to optimize the use of Silicon Carbide.

DMSF / DMSC double mechanical seal

DMSF & DMSC

Double Monolithic Stationary Flow / Convection

The DMSF? (Double Monolithic Stationary Flow) range of double mechanical seals has been designed as a high-performance sealing solution for arduous applications.

SMSS - Single Cartridge Seal

SMSS

Single Cartridge Seal

A single cartridge stationary seal with modular monolithic seal faces.



http://www.enfionsh.com