产品描述


上海盈沣盈沣元器件有限公司专业代理销售德国TAM（Torque and More）传感器，TAM（Torque and More）力矩传感器，TAM（Torque and More）扭矩传感器

如有需求，欢迎来电垂询 缑先生

Active Torque Sensor

The magnetic principle based, non-contact height sensor system from Torque And More measures the distance between the sensing module and a reference device. The system has a large measurement range of above 1,0m and a high signal resolution of 0,1mm.
The height sensor system consists of three building blocks: the sensor device, the reference device, and the sensor electronics. The sensing device and the sensor electronics can be placed at the same location.

Simply place the sensor module nearest to the location where the measurements should be taken from. The measurements will take place immediately after the sensor is powered-up. There is absolutely no need to attach or to glue anything onto the test shaft. No additional magnetic treatment is required.

active torque sensor

Sensor Description:

The Active torque sensor device can measure immediately when placed to any object that has magnetic properties (easy to test by holding a permanent magnet to the test object). The Active torque sensor can be very easily applied to any shaft diameter and can also be taken off easily to be re-used at another measurement location.

Some of the outstanding and novel features of this Active sensing technology are: that the sensing performance will not age, that it can be applied to shafts / tube of any diameter, that it can measure through layers of paint and that the physical dimensions of the sensing module are very small. The
Active torque sensor can be used on stationary or moving / rotating objects and it is insensitive to humidity, splashing water, oil vapour, non-corrosive oil, dust, rust (limits apply), and any magnitude of physical upset of the test object (shocks or vibrations).

Features:

  • True Non-Contact Sensor (static and rotational)
  • Ideal for any size of shaft diameter
  • Active Field Generator eliminates any signal aging
  • Simply hold to test object to start measurements
  • Analogue and Serial Digital signal output
  • Insensitive to magnetic fields
  • Insensitive to mechanical shocks or vibrations

The sensor’s signal output can be either a linear voltage (from 0 Volt to +5 Volt) or of a serial digital format. Where space is critical, the sensor electronics can be placed elsewhere so that only the small-sized sensor-head needs to face the test object.

Specifications:

Active Sensing Technology Portfolio V1-5


Advanced Active-3 Torque Sensors

Plug-and-Play, Distance Compensated, Non-Contact and Easy to Apply

Torque can be measured instantly by placing a thumb-sized probe onto the Test Object (like a gearbox shaft) and then simply pushing the initialisation button.

The Active-3 Torque Sensor is ideal for industrial, motorsport, and power-tool applications. Active-3 boasts a high signal resolution (14 bits), high system internal signal bandwidth (10,000 samples per second), and impressive measurement linearity (0.2% of Full Scale).

Insensitive to air gap changes

A3_Advanced_NewBox


Image: Active-3 Torque Sensor Kit: Sensing Module, Sensor Electronics, Power Supply, Software, Cable and manual

  • No shaft processing required
  • No damage due to over-torque
  • Does not age
  • Air gap can be up to 3 mm
  • Any Ferro-magnetic material
  • Insensitive to oil, dirt, paint, etc.
  • Analogue Signal (5 Volt)
  • Wide temperature range
  • Single voltage supply
  • Windows-PC USB Interface


http://www.enfionsh.com