上海盈沣元器件有限公司专业代理销售美国Pacific仪器，Pacific自动放大器，Pacific放大器，pacific信号控制系统，pacific瞬态记录器，pacific数据采集系统

如有需求，欢迎来电垂询 缑先生
The Series 7000 Ruggedized Ethernet DAS brings new capabilities and levels of performance to transducer data acquisition

Model 7200 24k S/s per Channel 10 kHz Analog Bandwidth 0.05% or Better Accuracy Strain / Bridge / Voltage

Model 7300 102.4k S/s per Channel 50 kHz Analog Bandwidth 0.1% or Better Accuracy Strain / Bridge / Voltage IEPE (Coming Soon)

Model 7400 --- Coming Soon --- 204.8k S/s per Channel 100 kHz Analog Bandwidth 0.1% or Better Accuracy Dynamic Strain IEPE / Charge / Voltage

Series 5800 Conditioning & Transient Recording System I/O Modules

larger image Features Record fast events, up to 10 MS/s One pre-trigger and two post-trigger sample rates Rugged 3 or 16 channel, battery operated enclosures 16 Channel A/C powered laboratory enclosures Ethernet interface with Windows software Dual inputs, bridge and ICP Programmable for 1/4, 1/2 and full bridges Voltage & shunt calibration Automatic, hands-off operation Analog output for external recording Description Individual channel modules that plug into the 5800 enclosures condition, amplify, filter, digitize and store the transducer signals. Simultaneous sampling provides excellent time correlation between channels and external events. The digitizer is available with 14, 16 or 24-bit resolution and sample rates up to 10 Million samples per second. Data acquired by the 5800 is digitized and recorded in non-volatile, solid-state memory. It records calibration, pre-trigger and post-trigger data. In a typical test scenario recording of pre-trigger data is initiated by a TTL input, program instruction, or automatic sequencer. A TTL input or on-board discriminator triggers post trigger data recording. The quantities and sample rates of pre and post-trigger data storage are programmable, enabling the 5800 to be configured according to the characteristics of the data being acquired. Sample rate can be changed during acquisition without interrupting data flow to capture high-speed events, yet have sufficient memory space to record long-term effects. The 5800 can be configured for multiple records, each using the same pre and post-trigger sampling profile. Data is debriefed and transferred to permanent storage by the Ethernet interface. Each channel has two inputs: one for bridges, voltage, RTDs, potentiometers and thermocouples; the other AC coupled with current excitation for transducers with built-in electronics. Signal conditioning includes programmable excitation and completion for 1/4, 1/2 and full bridge, AC-coupling, automatic balance, voltage and four-step shunt calibration, programmable gain and a four frequency, eight-pole filter.

Series 5800 Conditioning & Transient Recording System Enclosures

larger image 3 different enclosures are available for Series 5800. 2 enclosures, Model 5871 and 5872 are typically used for recording transient data in harsh physical environments as would be encountered in explosives and explosive effects testing. Model 5810 is used in laboratory environments where high speed transient recording is needed.  Data/Programming and Control Interfaces  · Mechanical  · Ordering Information  Data/Programming and Control Interfaces Data/Programming Switches Ethernet 100BaseT interface for each channel group. Multiple groups using Ethernet hubs and switches. Control Control Module distributes PCM encoded clock, autostart, start and trigger signals. Cat. 5 5881/82 Control Modules each operate up to 16 recorder channel groups over a distance of up to 50 meters using Category 5 (Ethernet) cable. Optic Cable Two 5883 Control Modules make a transmitter-receiver pair that operate up to 16 recorder channel groups over fiber optic cable. Mechanical Size (5871/81/83) 4.125" wide, 5.125" high, 15" deep exclusive of connectors, 17" deep overall. Mounts in 19-inch rack with optional mounting tray. Size (5872) 17" wide, 10.5" high, 12" deep. Mounts in 19-inch rack with optional adapter kit. DC Voltage 10.5 to 20 V Temperature 0 to +55 oC Altitude 0 to 20,000 ft Shock 50Gs, 11ms, 1/2 sine any axis. Vibration 20 Hz to 2 kHz, 5Gs peak, 0.1 inch maximum displacement. Humidity 95 % Ordering Information  Ordering Information 5871 - Ruggedized Data Recorder, 3 channels in one group, battery powered, Ethernet interface.  5872 - Ruggedized Data Recorder, 16 channels in two groups of eight, 12 VDC, Ethernet interface.  5810 - Data Recorder, 16 channels in two groups of eight, 120 V, Ethernet interface. Command-Modules 5881 - Ruggedized Command Module, Cat.5, battery powered 5882 - Command Module, Cat 5., 12 VDC. 5883 - Ruggedized Command Module, Optic, battery powered. Options 5758 - Fan Cover for 5872. 5850 - Mounting Tray for 5871/81/83. 5891 - Power Supply, 115 VAC for 5871/81/83. 5892 - Power Supply, 115 VAC for 5872. 5893 - Uninteruptable Power Supply.

Series 6100
Automated Amplifiers

• High Performance Conditioning
• Static & Dynamic Strain, RTD, Charge, IEPE, Instrumentation Amp
• 300V Common Mode Rejection
• Buffered Analog Outputs to External A/D
• Turnkey & API Software

Series 6100 is an automated, fully programmable transducer signal conditioning amplifier system. The basic mainframe holds 32 channels, expandable to 1,024 channels and is available with RS-232, IEEE-488 or Ethernet interface and software for Windows.

• Plug-in completion cards configure channel for multiple transducer types
• Voltage & current excitation with remote sensing & excitation interrupt
• Per channel isolation with 300V common mode rejection
• Voltage substitution calibration
• 4-step, bipolar resistive or DAC shunt calibration
• 100kHz bandwidth & gains 1 to 10,000
• Selectable 4 or 8-pole low-pass filters
• Dual buffered 10V analog outputs

Series 9300 is a fully programmable, modular signal conditioning amplifier system with isolated excitation, 300V common mode rejection, programmable filters and dual analog outputs. Channels are controlled from the front panel or Windows software. Plug in completion cards allow the 9300 to be used with a variety of transducer types.

• Gains from 0.01 to 5,000
• 0.1% or 0.02% gain accuracy
• 100 kHz bandwidth
• 300 Volt common mode
• 2 or 6-pole selectable low-pass filter
• Voltage substitution calibration
• Dual, 100 mA, floating outputs
• Optional AC input coupling

Model 70A is a full featured, wideband differential instrumentation amplifier which can be used for a variety of applications. Designed to amplify and filter low level signals, it can be used for line and galvanometer driving, data filtering and signal isolation ahead of an external acquisition system like the Series 6000.

		Model 6820 Turnkey Voltage/IEPE/ICP Data Acquisition System   Features 8, 16, 24 or 32 Channels IEPE/Voltage Input 100kS/s 16-Bit Digitizer Per Channel BNC Inputs AC/DC Coupling IRIG Time A, B or G 2 Digital Inputs / Outputs Turnkey Software Shipping Container Description Series 6800 is a ready-to-run, high performance Portable Measurement System that is DC powered and ruggedized for mobile applications. All connections are front mounted for easy installation in tight places or on the go. 6800 systems come equipped with a conditioner, amplifier, filter and digitizer. Each channel has a front mounted BNC connector for voltage or ICP/IEPE inputs. Individual channels have a differential ...
		Model 6840 Turnkey Strain/Bridge Data Acquisition System   Features 16, 24 or 32 Channels Strain/Bridge Input 10kS/s 16-Bit Digitizer Bridge Completion, Remote Sense, Shunt Calibration Lowpass Filters RJ45 Input Connector IRIG Time A, B or G 2 Digital Inputs / Outputs Turnkey Software Shipping Container Description Series 6800 is a ready-to-run, high performance Portable Measurement System that is DC powered and ruggedized for mobile applications. All connections are front mounted for easy installation in tight places or on the go. 6800 systems come equipped with a conditioner, amplifier, filter and digitizer. Each channel has a front mounted RJ-45 connector for 8-wire bridge ...

		Model 6825 Turnkey ICP/IEPE Data Acquisition System   Features 16 Channels ICP/IEPE/Voltage Input 200kS/s 16-Bit Digitizer High Level Buffered/Calibrated Analog Outputs AC/DC Coupling BNC Inputs IRIG Time A, B or G Digital I/O PI660 Turnkey Software Included Description Series 6800 is a ready-to-run, high performance laboratory based Measurement System. Enclosures are 3U rack mountable or can be used right on the desktop. 6800 units come equipped with a conditioner, amplifier, filter and digitizer. Each channel has a front mounted BNC connector for voltage or ICP/IEPE inputs. Individual channels have a differential +/- 10V input and can digitize and record data to 16-bit ...
		Model 6830 Turnkey Instrumentation Amplifier System   Features 16 Channels Voltage/Instrumentation 200kS/s, 16-Bit Digitizer High Level Buffered/Calibrated Analog Outputs AC/DC Coupling 3-Pin MIL Inputs IRIG Time A, B or G Digital I/O PI660 Turnkey Software Included Description Series 6800 is a ready-to-run, high performance laboratory based Measurement System. Enclosures are 3U rack mountable or can be used right on the desktop. 6800 units come equipped with a conditioner, amplifier, filter and digitizer. Each channel has a front mounted 3-wire military grade connector. Individual channels have a differential +/- 10V input and can digitize and record data to 16-bit resolution...
		Model 6845 Turnkey Strain/Bridge Data Acquisition System   Features 16 or 32 Channels Strain/Bridge Input 10kS/s, 16-Bit Digitizer Bridge Completion, Remote Sense, Shunt Calibration, Low-pass Filters RJ45 Input Connector IRIG Time A, B or G Digital I/O PI660 Turnkey Software Included Description Series 6800 is a ready-to-run, high performance laboratory based Measurement System. Enclosures are 3U rack mountable or can be used right on the desktop. 6800 units come equipped with a conditioner, amplifier, filter and digitizer. Each channel has a front mounted RJ-45 connectors for 8-wire bridge transducers. Individual channels have a differential +/- 10V input and can digitize and record data to...

		Model 6855 32-Channel Thermocouple System   Features 32-Channel Configuration in a 3U Rack Mount Enclosure Utilizes Internal Uniform Temperature Reference (UTR) with Front Mounted 2-pin Mini TC Jacks (T, K, E or J) Digital Events & Hardware Alarms IRIG Time - A, B or G PI660 Turnkey Software Included Description Series 6800 ready-to-run, high performance Thermocouple Measurement Systems are available in many configurations. Each 6800 is equipped with an amplifier, filter and digitizer plus a Uniform Temperature Reference (UTR). Systems interface to a familiar Windows based operator workstation over USB 2.0 where the included software, PI660, is used for setup, display and acquisition of ...
		Model 6860 3U Thermocouple Scanner   Features 32, 64 or 96 Channel Configurations in a 3U Rack Mount Enclosure Utilizes External Uniform Temperature References (UTRs) UTR Model 6084-32, Screw Terminal Reference Allows for Integration of Any TC type and/or UTR Model 6084-32-RM is a 2U, Rack Mountable UTR with Front Mounted 2-pin Mini TC Jacks (T, K, E or J) IRIG Time - A, B or G PI660 Turnkey Software Included Description Series 6800 ready-to-run, high performance Thermocouple Measurement Systems are available in many configurations. Each 6800 is equipped with an amplifier, filter and digitizer plus a Uniform Temperature Reference (UTR). Systems interface to a familiar Windows based ...

• 16 I/O Module Slots
• 8U Rack Mount

• 4 I/O Module Slots
• 3U Rack Mount

• 4 I/O Module Slots
• 4U DC Powered

• 10 I/O Module Slots
• 6U DC Powered