上海盈沣元器件有限公司专业销售英国EiUK压力校验仪、EiUK压力测试泵、EiUK温度较准器、EiUK、EiUK多功能校准器、EiUK废气成分分析仪、EiUK烟气分析仪

主要型号：

PTB系列、PLB系列、TM系列、ETB系列、LPC 300、LPC 200、P12、P100、G10、LCC 100、PC4、PGS-60、PGS-40、PGS-7、PGS-700、PGS-1000、PGS-1V、RASI 800、RASI 700、Rasi 901、Rasi 200I、RASI 200、RASI 200C、RASI 700CA

 

		EiUK LPC 300 Documenting Process Calibrator Accuracy ±0.025 FS max. 6000 bar, mA/V reading up to 10 plug & play sensEiUK LPC 200 Electronic Pressure Calibrator ors		Details...
		Accuracy ±0.025% FS max. 6000 bar up to 10 plug & play sensors		Details...
		EiUK P12 High Accuracy Digital Test Pressure Gauge Accuracy ±0.025% FS max. 2500 bar opt. ATEX EEx ia IIC T4		Details...
		EiUK P100 Pressure Calibrator Accuracy ±0.05% FS max. 2000 bar		Details...
		EiUK G10 Reference Pressure Gauge Accuracy ±1.0% FS max. 1000 bar Analogue instrument, dual scale bar/psi		Details...
		EiUK LCC 100 Pressure Controller Accuracy ±0.1% FS max. 2 bar With internal electric pressure/vacuum pump		Details...
		EiUK PC4 Pressure Calibrator Accuracy ±0.2% FS max. 1 bar With internal manual pressure pump		Details...

 

PGS-60 Pneumatic Calibration Hand Pump
Range:-1 to 60 bar
Media : Air

PGS-40 Pneumatic Calibration Hand Pump
Range: -1 to 40 bar
Media: Air

PGS-700 Hydraulic Calibration Hand Pump
Range: 0 to 700 bar
Media: Oil or Water

PGS-1000 Hydraulic Calibration Hand Pump
Range: 0 to 1000 bar
Media: Oil or Water

PGS-7 Low pressure Pneumatic Test Pump
Range: 0 to 7 bar
Media: Air

PGS-1V Vacuum Calibration Test Pump        
Range: - 960 mbar to 0 bar
Media: Air

Temperature Calibrators

Portable Dry Block and Liquid baths temperature Calibrators

	PTB Series- Portable Temperature Calibrators Temperature Range from -50°C to 1100 Deg °C -Stability 003°C -Accuracy down to 0.08°C -Built in dual channel read out for UUT and Reference Sensor -Use as a Dry Blok, Ice Point, Surface Sensor calibration,   Infrared thermometers Calibrator
	PLB Series- Portable Liquid Baths Temperature Range from -35 to 250 Deg °C -Stability 002°C -Accuracy down to 0.08°C -Built in dual channel read out for UUT and Reference Sensor -Large Calibration Volume 54x150 mm -Use as a Dry Block, Ice Point, Surface Sensor calibration,  Infrared thermometers Calibrator
	TM Series- Marine Temperature Calibrators Temperature Range from -45 to 650 Deg °C -110/220 VAC switching operation- -interchangeable multi-hole insert- -Stand alone switch test function -Light way and easy to transport
	ETB Series- Multifunction Temperature Calibrators Temperature Range from -55 to 1200 Deg °C -Use as Dryblock, liquid bath and Infrared Calibrator -Stability: ±0.02 °C ( ETB 140) -Excellent Radial and Axial Uniformity -Digital interface as standard -Calibrate all type of sensors

		RASI 200 Multi-Purpose Flue Gas Analyser Flue Gas Analyser for domestic Boilers. Suitable for Gas, Oil and wood fired Boilers, RASI 200 is not just a combustion analyser but much more Chell all combustion parameters Measure differential temperature Measure differential pressure and draft Perform let by, stabilization and tightness test Perform CO test Tested to BS 7967 and BS EN 50379 5 years limited warranty Available in different kits (CPA1 KIT) Get more info here...
		RASI 200C Flue Gas Analyser Flue Gas Analysers for commercial/industrial boilers. Suitable for Gas, Oil and wood fired Boilders. RASI 200C is equipped with a long life high CO cell (H2 compensated as required by legislation) for use on highly contaminated boilers CO (H2) 0 to 8000 ppm Check all combustion parameters Measure differential temperature Measure differential pressure up to 300 mbar Measure draft Perform let by, stabilization and tightness test Perform CO test Tested to BS 7967 and BS EN 50379 5 years limited warranty Get more info here...
		RASI 700CA Advanced Flue Gas Analyser Advance Flue Gas Analyser for commercial/industrial boilers. Advanced flue gas analyser with high resolution, TFT colour graphical display for commercial boilers. Suitable for all gas, oil and wood fired boilers Multi-fuel Long life O2 and CO sensors Optional NO/NOX sensor Measures and displays flue gas oxygen, temperature and carbon monoxide, pressure differential and draft Calculates CO/CO2 ratio, CO2 and efficiencies net/gross and condensing Timed CO test Timed tightness and let by test AIR Ratio TüV approved to BS EN 50379 (independently tested) 5 years limited warranty Get more info here...