产品描述


上海盈沣元器件有限公司专业代理德国Kleinwaechter表面电阻测试仪,kleinwaechter重锤式表面电阻测试仪,kleinwaechter静电场测试仪 如有需求，欢迎来电垂询 缑先生  TOM 374 (Not available at the moment) <img width="160" height="143" align="right" alt="TOM 374" src="http://www.kleinwaechtergmbh.de/cms/upload/bilder/tom/tom374/tom374.jpg" border="0" />The 
TERA ohmmeter TOM 374 uses the voltage measuring method, whereas a a electro 
field meter is used  as a measuring amplifier due to its high input resistance. 
Therefor high resistors up to 1014Ω can be measured with a measuring 
voltage of 100V and an accuracy of 5% directly against earth. Besides the 
connecting sockets are additional ground jacks to connect earthed measuring 
lines to eliminate measuring inaccuracies due to parasitary effects. To comply 
to standards  (IEC, EN, DIN, VDE u.a.) the demanded measuring time can be 
adjusted by an internal timer. The input impedancy of the device is &gt; 
1016Ω  Specifications: Dimensions: 150mm x 150mm x 88mm (L x W x H) Weight: Approx. 990g Display:   Double spaced alphanumeric two digit display, display 100mm x 24mm Serial pc interface:  Serial interface for device controlling and data output (9-pol. SUB-D 
connector) Power supply:       Internal with storage battery 7,2V / 1300mAh (permanently supervised), 
operation time approx. 4h permanent operation with fully charged 
battery  external with mains adapter 12V DC / 500mA Charge time: Max. 14h Charging rate: Approx. 100 mA in battery operation Self power-off: Approx. 5min after end of measuring if no button 
pressed  Scope of delivery Transport case with conductive foam interior Mains adapter 230V~ / 50Hz - 12V DC / 500mA 2 pc. teflon-coated measuring line 1m with 4mm banana plugs Grounding cable with alligator clip Serial pc cable PC software on 3,5“ floppy Manual Declaration of calibration  <img align="middle" alt="TOM 374 im Koffer mit Elektroden" src="http://www.kleinwaechtergmbh.de/cms/upload/bilder/tom/tom374/tom374-koffer.jpg" border="0" />   TOM 600 <img width="120" height="309" align="right" alt="TOM 600" src="http://www.kleinwaechtergmbh.de/cms/upload/bilder/tom/tom600/tom600.jpg" border="0" />The TERA - Ohm Meter TOM 600 works with the 
current-voltage measuring process.   To the adaptation to international norms 
(IEC) EN, DIN, VDE i.e.) you can select the measuring   time with an internal 
timer. The measuring voltage can be selected automatically or manually.  An 
internal EEPROM memory can save up to 99 measured values. With an Excel software 
you can read out and control the TOM 600.   Measuring range   10 kΩ... 2 TΩ  ( 
104....1012Ω)  tolerance: ± 1 x 
10n   Measuring voltages   &lt; 200kΩ  
=    10V  &gt; 200kΩ  =  100V Specifications Dimensions: 200mm x 100mm x 40mm (L x W x H) Weight: approx. 380g (without batteries) Display:   Alphanumeric display (2 rows x 16 digits), indicator panel 60mm x 
15mm PC-Interface:     USB - Interface with small USB Socket   Power supply:     4 pc. AA cells, 2100mAh. (permanent supervised) operating time approx. 6h 
with fully charged cells, external with mains adapter 9V DC / 
300mA Charging time: max. 14h Power comsumption: max. 100mA Auto Switch Off: approx. 5min after the measurement, when no button 
pressed  Scope of delivery TOM-600   Mains adapter  230V~ / 50Hz  -  9V DC / 300mA 4 pc. AA Mignon NiMH cells 2 pc. teflon isolated measurement strips 1m each, with 4mm banana plugs serial pc USB software on CD manual    Additional scope of delivery TOM-600 ME 2 pc. measurement electrodes 2,5 kg according to EOS/ESD-S4.1 and S7.1 1 pc. teflon isolated measurement strip 5m instead of 1 pc. teflon isolated 
measurement strip 1m with 4mm banana plugs  EFM 022 (336.022.0) <img width="150" height="180" align="right" alt="Elektrofeldmeter EFM 022" src="http://www.kleinwaechtergmbh.de/cms/upload/bilder/Elektrofeldmeter/efm022/efm022_front.jpg" border="0" />The electro fieldmeter EFM 022 is very user friendly due 
to its compact design and one touch operating. The dissipative housing of the 
unit is EPA - compatible. Menu driven selection of measurement 
distance Voltage potentials can be directly measured for preselected 
measurement distances, thus would avoid recalculation. 5 measurement distances 
are available, which makes it even possible for your most convenient handling in 
problematic areas. Hold function The hold function keeps the 
actual reading in memory, e.g. after obtaining measurements in spots where the 
on-line reading of display is not possible. No zero drift Therefore a zero 
adjustment is not needed before each measurement. Measurement 
ranges:  distance 1cm: 0 to 8kV distance 2cm: 0 to 16kV distance 5cm: 0 to 40kV distance 10cm: 0 to 80kV distance 20cm: 0 to 160kV   Specifications:  Dimensions: 122mm x 70mm x 26mm ( L x W x H ) Weight: approx. 130 g (without battery) Power supply: 9V Alkali battery  IEC 6F22 Display:     2-line alphanumeric LC-display with 12 digits each  The measurement 
distance in cm will be displayed in the first line, the voltage potential will 
be indicated in volts in the second line. Scope of delivery: soft bag 9V Alkaline battery grounding cable 1,5m  2 distance supports (2cm) manual certificate of calibration EFM 113B (336.113.0) <img width="150" height="160" align="right" alt="EFM 113B" src="http://www.kleinwaechtergmbh.de/cms/upload/bilder/Elektrofeldmeter/efm113b/efm113-125.jpg" border="0" />The EFM 113B is a small and handy electro field meter 
with a high sensitivity designed for the measurement of dc fields and static 
charges according to the fieldmill influence principle. Analog current output  
(±1mA).         Specifications: Dimensions: 120mm x 40mm (l x d) Measuring range: 5kV/m, 20kV/m, 50kV/m und 200kV/m Metering precision: 5% in a homogenous field Calibration:  In the homogenous field of a plate capacitor  plate size 200mm x 200mm, 
plate distance 25mm  modulator system mounted centered in the plate Power supply: 9-15V DC / 80mA Interface: Analog current output ?1mA Mounting:   Alumonium clamping yoke with photo thread (optional) Operating time: In one shift operation min. 2 
years  Scope of delivery Connection cable Manual Declaration of calibration EFM 120 (336.120.0) <img width="160" height="214" align="right" alt="EFM 120" src="http://www.kleinwaechtergmbh.de/cms/upload/bilder/Elektrofeldmeter/efm120/efm120.jpg" border="0" /> Small and handy electro field meter with 21 figure LED row with smooth 
transition. This provides a scale-reading precision of approx. 
5%. Special features:  Solid aluminium housing LED bargraph, thereby high scale-reading precision Zero point with green LED Built-in NiMH storage battery with permanent charging supervision Analog writer output ± 1V for data recording Easy appliance and maintenance  Walking Test according to DIN 61340-4-5 Together with the optional pico software, the hand-held electrode and the 
gage head MK11 S2 a walking test according to DIN 61340-4-5 can be performed. Specifications: Measuring range: ± 20 kV/m, ± 200 kV/m, ± 2 MV/m Dimensions: 100mm x 80mm x 38mm (l x w x h) Weight: Approx. 370g Writer output: ± 1V / Ri &gt;1kΩ  Scope of 
delivery Transport case with conductive foam interior Built-in 7,2V NiMH - Akku Mains adapter 230V~ / 50Hz Grounding cable with alligator clip Measuring line to connect the writer output Manual  Declaration of calibration EFM 122 (336.122.0) <img width="120" height="154" align="right" alt="EFM 122" src="http://www.kleinwaechtergmbh.de/cms/upload/bilder/Elektrofeldmeter/efm122/efm122.jpg" border="0" />With the EFM 122 you can measure the potential of an object in Volt 
over a pre-selectable distance between the electrode and the measuring object. 
Charges and fields of positive and negative polarity can be located and 
measured. You can select the measuring distance between 1cm, 2cm, 5cm, 10cm and 
20cm. The integrated micro controller converts the measured field intensity 
automatically to the charge of an equivalent potential in Volt. Potentials 
higher than 1000V are displayed in kV. The handy design with separate measuring 
electrode and the data latching feature enable measuring at places where you 
have concentrate on positioning the electrode for safety reasons. Please Note: This instrument includes only a serial 
Interface with a simple DOS Software. To use at a PC we prefer one of our other 
instruments with analoque Interface ±1V and our UAC 110 wit the ReadOut Software 
!!  Specifications: Dimensions:   Hand-held unit: 70mm x 122mm x 26mm (L x W x H)  Gage head: ? 36mm x 
136mm Weight:  Hand-held unit 130 g (without storage battery), gage head 190 g Power supply: 9V NiMH storage battery with charger DC 12 V  Measuring ranges:    distance 1 cm : 0.....10 kV max. resolution 1 V  distance 2 cm : 0.....20 
kV max. resolution 2 V  distance 5 cm : 0.....50 kV max. resolution 10 
V  distance 10 cm : 0...100 kV max. resolution 10 V  distance 20 cm : 
0...200 kV max. resolution 20 V Display: Double spaced alphanumeric 12-digit LCD display Operating time: Approx. 2 Std. in battery mode  Calibration:     In homogenous field of a plate capacitor, plate size 100mm x 100mm, plate 
distance 20mm, modulator system mounted centered   <img width="120" height="170" align="right" alt="EFM 122 in transport case" src="http://www.kleinwaechtergmbh.de/cms/upload/bilder/Elektrofeldmeter/efm122/efm122koffer.jpg" border="0" /> Scope of delivery EFM-122 sensor with insulation cap 9V NiMH storage battery, charger 12V Manual Declaration of calibration Transport case with conductive foam interior Grounding spiral cable with alligator clip DOS PC software and serial connection cable   EFM 125 (336.125.0) <img width="150" height="160" align="right" alt="EFM 125" src="http://www.kleinwaechtergmbh.de/cms/upload/bilder/Elektrofeldmeter/efm113b/efm113-125.jpg" border="0" /> Small electro fieldmeter for the permanent control and 
the measuring of electrostatic DC-fields and electrostatic charges with high 
sensitivity, using the fieldmill influence principle.  Serial RS485 bus system 
for up to 16 EFM 125. (8 Bit data protocol) Specifications: Dimensions: 120mm x 40mm (l x d) Measuring range: 5kV/m, 20kV/m, 50kV/m und 200kV/m Metering precision: ± 5% in an homogenous field Calibration:  In homogenous field of a plate capacitor  plate size 200mm x 200mm, plate 
distance 25mm  modulator system mounted centered in the plate Power supply: 9-15V DC / 80mA Interface: Serial RS485 Bus Mounting:   Aluminium clamping yoke with photo thread (optional) Operating time: In one shift operation min. 2 
years  Scope of delivery Connection line Manual Declaration of calibration  EFM 231 (336.231.0) <img align="right" alt="EFM 231" src="http://www.kleinwaechtergmbh.de/cms/upload/bilder/Elektrofeldmeter/exx/exx.jpg" border="0" />High quality, 
precise, handheld electro fieldmeter. The incorporated micro-computer provides 
high operating comfort and ensures safe operating.    Features Solid aluminium pistol housing Built-in 7,2V NiMH storage battery Very high sensitive and accuracy Analog display Analog output ±1V Serial PC interface    Measuring ranges   ± 2 kV/m  ±20 kV/m  ±200 kV/m    Specifications: Dimensions: 180mm x 73mm x 178mm (L X W X H) Weight: Approx. 820g Display: Analog device -2..0..+2  Kl. 1,5 Calibration accuracy: ±2% Output signal:   ±1V analog output (Ri&gt; 1kΩ) and serial RS232 
interface   Scope of delivery: Transport case equipped with conductive foam interior Mains adapter 230V~ / 50Hz Measurement aperture x10 Stereo jack for the analog output Grounding cable with alligator clip Serial PC cable PC interface siftware on 3,5" floppy Manual Declaration of calibration  EFM 251 (336.251.0) <img width="120" height="143" align="right" alt="EFM 231" src="http://www.kleinwaechtergmbh.de/cms/upload/bilder/Elektrofeldmeter/exx/exx.jpg" border="0" />High quality, precise, handheld Electro-Fieldmeter. The incorporated 
micro-computer provides high operating comfort and ensures safe operating.    Features Solid aluminium pistol housing Built-in 7,2V NiMH storage battery Very high sensitive and accuracy Analog display Analog output ±1V Serial PC interface    Measuring ranges   ± 200 
V/m  ± 2 kV/m  ± 20 kV/m    Specifications: Dimensions: 180mm x 73mm x 178mm (L X W X H) Weight: Approx. 820g Display: Analog device -2..0..+2  Kl. 1,5 Calibration accuracy: ±2% Output signal:   ±1V analog output (Ri&gt; 1kΩ) and serial RS232 
interface  Scope of delivery  Transport case equipped with conductive foam interior Mains adapter 230V~ / 50Hz Measurement aperture x10 Stereo jack for the analog output Grounding cable with alligator clip Serial PC cable PC interface siftware on 3,5" floppy Manual Declaration of calibration  
		EFM 022 静电测试仪器 EFM 113B 静电测试仪器 EFM 120 静电测试仪器 EFM 122 静电测试仪器 EFM 125 静电测试仪器 EFM 231 静电测试仪器 EFM 251 静电测试仪器 CPS 022 静电测试仪器 CPM 374 静电测试仪器 TOM 374 静电测试仪器 TOM 600 静电测试仪器 PGT 50 静电测试仪器 PMS 300 静电测试仪器 SST 200 静电测试仪器 WST 50 静电测试仪器 WST 100 静电测试仪器

http://www.enfionsh.com